| Peer-Reviewed

The Holistic Approach of Plastic Waste Recycling for Sustainable Development

Received: 10 August 2023     Accepted: 25 August 2023     Published: 25 September 2023
Views:       Downloads:
Abstract

The rapid increase in plastic production has led scientists and researchers to seek innovative and sustainable approaches for reusing and recycling plastic waste, aiming to mitigate its adverse environmental impact. Plastic waste is finding applications in various sectors, including construction materials, fuel conversion, household goods, fabric, and clothing, offering viable alternatives. Particularly, the utilization of plastic waste in construction materials has gained significant attention. This practice serves a dual purpose: it reduces plastic waste going to landfills or becoming litter and diminishes the reliance on mined construction resources, thus mitigating the construction industry's environmental footprint. This paper provides an overview of developments in utilizing plastic waste as a component of construction materials. Its incorporation as a binder, aggregate, fine aggregate, modifier, or substitute for cement and sand in the production of bricks, tiles, concrete, and roads is comprehensively examined. The impacts of adding plastic waste on properties such as strength, water absorption, and durability are thoroughly explored. The review classifies research studies depending on whether they relate to the incorporation of plastic waste in bricks and tiles or its inclusion in concrete for road construction. The utilization of plastic waste within construction materials emerges as a pivotal locus where environmental, industrial, and social concerns coalesce, propelling us toward a future that champions resource efficiency, ecological harmony, and sustainable prosperity. This paper serves as an illuminating guidepost within this trajectory, celebrating the metamorphosis of a burgeoning idea into a tangible, transformative reality within the larger narrative of sustainable development.

Published in International Journal of Energy and Environmental Science (Volume 8, Issue 5)
DOI 10.11648/j.ijees.20230805.11
Page(s) 88-99
Creative Commons

This is an Open Access article, distributed under the terms of the Creative Commons Attribution 4.0 International License (http://creativecommons.org/licenses/by/4.0/), which permits unrestricted use, distribution and reproduction in any medium or format, provided the original work is properly cited.

Copyright

Copyright © The Author(s), 2023. Published by Science Publishing Group

Keywords

Plastic Recycling, Waste Management, Plastic Waste, Sustainable Development, Environmental Impact

References
[1] M. Medina, (2005). Serving the unserved: Informal refuse collection in Mexico. Waste Manage and Research; 23: 390-397.
[2] A. Matter, M. Dietschi, C. Zurbruegg. (2013). Improving the informal recycling sector through segregation of waste in the household – the case of Dhaka Bangladesh. Habitat Int; 38: 150–156.
[3] M. A Troschinetz, R. J. Mihelcic. (2009). Sustainable recycling of municipal solid waste in developing countries. Waste Manage; 29: 915–923.
[4] C. Ezeah, A. J. Fazakerley, L. C Roberts. (2013). Emerging trends in informal sector recycling in developing and transition countries. Waste Manag; 33: 2509–2519.
[5] S. Ojeda-Benitez, C. Armijo-de-Vega, E. Ramirez-Barreto. (2002). Formal and informal recovery of recyclables in Mexicali, Mexico: handling alternatives. Res, Conservation and Recycling; 34: 273–288.
[6] EEA. (2008). Better management of municipal waste will reduce greenhouse gas emissions. Copenhagen, Denmark: European Environment Agency.
[7] S. I. Zen, C. Siwar. (2015). An analysis of household acceptance of curbside recycling scheme in Kuala Lumpur, Malaysia. Habitat Int; 47: 248-255.
[8] B. Renbi, M. Sutanto. (2002) “The practice and challenges of solid waste management in Singapore”, Waste Management, Vol. 22 No. 5, pp. 501-6.
[9] W. McDonough, M. Braungart.(2002). Cradle to cradle: remaking the way we make things. New York, NY: North Point Press.
[10] T. Chilton, S. Burnley S, N. Suresh. (2010). A Life Cycle Assessment of the Closed-Loop Recycling and Thermal Recovery of Post-Consumer PET. Journal Res, Conservation and Recycling.
[11] S. Li. (2010). Open-loop recycling: a LCA case study of PET bottle-to-fibre recycling. Res, Conservation and Recycling; 55 (1): 34–52.
[12] C. Ingrao, I. A. Giudice, C. Tricase, R. Rana, C. Mbohwa, V. Siracusa. (2014). Recycled-PET fibre based panels for building thermal insulation: Environmental impact and improvement potential assessment for a greener production. Sci of the Total Environ; 493: 914–929.
[13] W. Frank. (2011). Twenty years of PET bottle to bottle recycling—an overview. Res Conservation and Recycling; 55 (11): 865–875.
[14] J. Hopewell, R. Dvorak., E Kosior. (2009). Plastics Recycling: Challenges and Opportunities. Phil. Trans. R. Society and Biological Science, 364: 2115–2126.
[15] S. M. Al-Salem, P. Lettieri, J. Baeyens. (2009). Recycling and recovery routes of plastic solid waste (PSW): A review. Waste Manage, 29: 2625–2643.
[16] Tiwari A, Singh S, Nagar R (2016) Feasibility assessment for partial replacement of fine aggregate to attain cleaner production perspective in concrete: a review. J Clean Prod 135: 490–507.
[17] Gu L, Ozbakkaloglu T (2016) Use of recycled plastics in concrete: a critical review. Waste Manage 51: 19–42.
[18] Toghroli A, Shariati M, Sajedi F, et al. (2018) A review on pavement porous concrete using recycled waste materials. Smart Structures and Systems 22: 433–440.
[19] Babafemi A, Šavija B, Paul S, Anggraini V (2018) Engineering properties of concrete with waste recycled plastic: a review. Sustainability 10: 3875.
[20] Mercante I, Alejandrino C, Ojeda JP et al (2018) Mortar and concrete composites with recycled plastic: a review. Science and Technology of Materials 30: 69–79.
[21] Singh S, Dwivedi SP, Kumar A (2021) A critical review on the utilization of waste PET and marble dust in the development of composite material. Materials Today: Proceedings.
[22] Haque MdS (2019) Sustainable use of plastic brick from waste PET plastic bottle as building block in Rohingya refugee camp: a review. Environmental Science and Pollution Research 26.
[23] Salih MM, Osofero AI, Imbabi MS (2020) Critical review of recent development in fiber reinforced adobe bricks for sustainable construction. Front Struct Civ Eng 14: 839–854.
[24] Bejan G, Bărbuță M, Ștefan VR, Burlacu A (2020) Lightweight concrete with waste - review. Procedia Manufacturing 46: 136–143.
[25] Awoyera PO, Adesina A (2020) Plastic wastes to construction products: status, limitations and future perspective. Case Studies in Construction Materials 12: e00330.
[26] Li X, Ling T-C, Hung Mo K (2020) Functions and impacts of plastic/ rubber wastes as eco-friendly aggregate in concrete – a review. Constr Build Mater 240: 117869.
[27] Zulkernain NH, Gani P, Chuck Chuan N, Uvarajan T (2021) Utilisation of plastic waste as aggregate in construction materials: a review. Constr Build Mater 296: 123669.
[28] Vishnu TB, Singh KL (2020) A study on the suitability of solid waste materials in pavement construction: a review. International Journal of Pavement Research and Technology, 1-13.
[29] Ogundairo TO, Olukanni DO, Akinwumi II, Adegoke DD (2021) A review on plastic waste as sustainable resource in civil engineering applications. IOP Conf Ser: Mater Sci Eng 1036: 012019.
[30] Americanchemistry (2010), Life Cycle of a Plastic Product, Archived from the original.
[31] Aneke FI, Shabangu C (2021) Green-efficient masonry bricks produced from scrap plastic waste and foundry sand. Case Studies in Construction Materials 14: e00515.
[32] Ikechukwu AF, Shabangu C (2021) Strength and durability performance of masonry bricks produced with crushed glass and melted PET plastics. Case Studies in Construction Materials 14: e00542.
[33] Limami H, Manssouri I, Cherkaoui K, Saadaoui M, Khaldoun A (2020) Thermal performance of unfired lightweight clay bricks with HDPE & PET waste plastics additives. Journal of Building Engineering 30 (101251): 1–12.
[34] Limami H, Manssouri I, Cherkaoui K, Khaldoun A (2020) Study of the suitability of unfired clay bricks with polymeric HDPE & PET wastes additives as a construction material. Journal of Building Engineering 27: 100956.
[35] Kumi-Larbi A, Yunana D, Kamsouloum P et al (2018) Recycling waste plastics in developing countries: use of low-density polyethylene water sachets to form plastic bonded sand blocks. Waste Manage 80: 112–118.
[36] Mondal MK, Bose BP, Bansal P (2019) Recycling waste thermoplastic for energy efficient construction materials: an experimental investigation. J Environ Manage 240: 119–125.
[37] Choi N-W, Mori I, Ohama Y (2006) Development of rice husks–plastics composites for building materials. Waste Manage 26: 189–194.
[38] Kognole R, Shipkule K, Survase K (2019) Utilization of plastic waste for making plastic bricks. International Journal of Trend in Scientific Research and Development 3: 878–880.
[39] Monish K, Jesuran JJ, Kolathayar S (2021) A sustainable approach to turn plastic waste into useful construction blocks. pp 55–62.
[40] Owolabi Wahab Folorunsho and Akobundu Nwanosike Amad, (2020). Production of pavement blocks from plastic waste, The Pacific Journal of Science and Technolog, Volume 21. Number 2, PP-36–43.
[41] Sellakutty D, Dinesh A, Kirubakaran K (2016) Utilization of waste plastic in manufacturing of bricks and paver blocks. International Journal of Applied Engineering Research 16: 364–368.
[42] Seghiri M, Boutoutaou D, Kriker A, Hachani MI (2017) The possibility of making a composite material from waste plastic. Energy Procedia 119: 163–169.
[43] Behera D (2018) Experimental investigation on recycling of plastic wastes and broken glass in to construction material. International Journal of Creative Research Thoughts 6: 1659–1667.
[44] Dalhat MA, Al-Abdul Wahhab HI (2016) Cement-less and asphaltless concrete bounded by recycled plastic. Constr Build Mater 119: 206–214.
[45] O. Y. Marzouk et al. (2007). Valorization of post-consumer waste plastic in cementitious concrete composites, Waste Management.
[46] Pelisser F, Montedo ORK, Gleize PJP, Roman HR (2012) Mechanical properties of recycled PET fibers in concrete. Mat Res 15: 679– 686.
[47] Dombe S, Tapase AB, Ghugal YM, Konnur BA, Akshay P (2020) Investigation on the use of E-waste and waste plastic in road construction. Environmental Science 85–99.
[48] Gavhane A, Sutar D, Soni S, Patil P (2016) Utilisation of E-plastic waste in concrete. International Journal of Engineering Research & Technology (IJERT) 5: 594-601.
[49] Damal VS, Londhe SS, Mane AB (2015) Utilization of electronic waste plastic in concrete. 5: pp. 35–38.
[50] Azhdarpour AM, Nikoudel MR, Taheri M (2016) The effect of using polyethylene terephthalate particles on physical and strengthrelated properties of concrete; a laboratory evaluation. Constr Build Mater 109: 55–62.
[51] Manju R, Sheema K, Sathya S (2017) Use of plastic waste in bituminous pavement. Int J ChemTech Res 10: 804–811.
[52] Rokdey, S. N., Naktode, P. L., & Nikhar, M. R. (2015). Use of plastic waste in road construction. International Journal of Computer Applications, 7, 27-29.
[53] Raja CJS, Sai Sampath N, Su Chesh A, Bhaskar Phani (2020) A review on use of plastic in construction of roads. Journal of Advancement in Engineering and Technology.
[54] Kazmi S, Rao DG (2015) Utilization of waste plastic materials as bitumen-blends for road construction in Oman. Scholars Journal of Engineering and Technology (SJET) 3: 9–13.
[55] Dawale (2016) Use of waste plastic coated aggregates in bituminous road construction. In: fdocuments. in.
[56] Rajput PS, Yadav RK (2016) Use of plastic waste in bituminous road construction. International Journal of Science Technology & Engineering 2: 509–513.
[57] Leng Z, Padhan RK, Sreeram A (2018) Production of a sustainable paving material through chemical recycling of waste PET into crumb rubber modified asphalt. J Clean Prod 180: 682–688.
[58] Khan IM, Kabir S, Alhussain MA, Almansoor FF (2016) Asphalt design using recycled plastic and crumb-rubber waste for sustainable pavement construction. Procedia Engineering 145: 1557–1564.
[59] Onyango F, Wanjala SR, Ndege M, Masu L (2015) Effect of rubber tyre and plastic wastes use in asphalt concrete pavement. International Journal of Civil and Environmental Engineering 9: 1403–1407.
[60] Jahidul Islam Md, Salamah Meherier Md, Rakinul Islam AKM (2016) Effects of waste PET as coarse aggregate on the fresh and harden properties of concrete. Constr Build Mater 125 (2016): 946–951.
[61] Barad M M (2015) Use of plastic in bituminous road construction. Journal of information 3: pp. 208–212.
[62] Bansal S, Kumar Misra A, Bajpai P (2017) Evaluation of modified bituminous concrete mix developed using rubber and plastic waste materials. Int J Sustain Built Environ 6: 442–448.
[63] Tina Maria Sunny (2018) Use of biomedical plastic waste in bituminous road construction. 5: 76–82.
Cite This Article
  • APA Style

    Naimul Haque Nayem. (2023). The Holistic Approach of Plastic Waste Recycling for Sustainable Development. International Journal of Energy and Environmental Science, 8(5), 88-99. https://doi.org/10.11648/j.ijees.20230805.11

    Copy | Download

    ACS Style

    Naimul Haque Nayem. The Holistic Approach of Plastic Waste Recycling for Sustainable Development. Int. J. Energy Environ. Sci. 2023, 8(5), 88-99. doi: 10.11648/j.ijees.20230805.11

    Copy | Download

    AMA Style

    Naimul Haque Nayem. The Holistic Approach of Plastic Waste Recycling for Sustainable Development. Int J Energy Environ Sci. 2023;8(5):88-99. doi: 10.11648/j.ijees.20230805.11

    Copy | Download

  • @article{10.11648/j.ijees.20230805.11,
      author = {Naimul Haque Nayem},
      title = {The Holistic Approach of Plastic Waste Recycling for Sustainable Development},
      journal = {International Journal of Energy and Environmental Science},
      volume = {8},
      number = {5},
      pages = {88-99},
      doi = {10.11648/j.ijees.20230805.11},
      url = {https://doi.org/10.11648/j.ijees.20230805.11},
      eprint = {https://article.sciencepublishinggroup.com/pdf/10.11648.j.ijees.20230805.11},
      abstract = {The rapid increase in plastic production has led scientists and researchers to seek innovative and sustainable approaches for reusing and recycling plastic waste, aiming to mitigate its adverse environmental impact. Plastic waste is finding applications in various sectors, including construction materials, fuel conversion, household goods, fabric, and clothing, offering viable alternatives. Particularly, the utilization of plastic waste in construction materials has gained significant attention. This practice serves a dual purpose: it reduces plastic waste going to landfills or becoming litter and diminishes the reliance on mined construction resources, thus mitigating the construction industry's environmental footprint. This paper provides an overview of developments in utilizing plastic waste as a component of construction materials. Its incorporation as a binder, aggregate, fine aggregate, modifier, or substitute for cement and sand in the production of bricks, tiles, concrete, and roads is comprehensively examined. The impacts of adding plastic waste on properties such as strength, water absorption, and durability are thoroughly explored. The review classifies research studies depending on whether they relate to the incorporation of plastic waste in bricks and tiles or its inclusion in concrete for road construction. The utilization of plastic waste within construction materials emerges as a pivotal locus where environmental, industrial, and social concerns coalesce, propelling us toward a future that champions resource efficiency, ecological harmony, and sustainable prosperity. This paper serves as an illuminating guidepost within this trajectory, celebrating the metamorphosis of a burgeoning idea into a tangible, transformative reality within the larger narrative of sustainable development.},
     year = {2023}
    }
    

    Copy | Download

  • TY  - JOUR
    T1  - The Holistic Approach of Plastic Waste Recycling for Sustainable Development
    AU  - Naimul Haque Nayem
    Y1  - 2023/09/25
    PY  - 2023
    N1  - https://doi.org/10.11648/j.ijees.20230805.11
    DO  - 10.11648/j.ijees.20230805.11
    T2  - International Journal of Energy and Environmental Science
    JF  - International Journal of Energy and Environmental Science
    JO  - International Journal of Energy and Environmental Science
    SP  - 88
    EP  - 99
    PB  - Science Publishing Group
    SN  - 2578-9546
    UR  - https://doi.org/10.11648/j.ijees.20230805.11
    AB  - The rapid increase in plastic production has led scientists and researchers to seek innovative and sustainable approaches for reusing and recycling plastic waste, aiming to mitigate its adverse environmental impact. Plastic waste is finding applications in various sectors, including construction materials, fuel conversion, household goods, fabric, and clothing, offering viable alternatives. Particularly, the utilization of plastic waste in construction materials has gained significant attention. This practice serves a dual purpose: it reduces plastic waste going to landfills or becoming litter and diminishes the reliance on mined construction resources, thus mitigating the construction industry's environmental footprint. This paper provides an overview of developments in utilizing plastic waste as a component of construction materials. Its incorporation as a binder, aggregate, fine aggregate, modifier, or substitute for cement and sand in the production of bricks, tiles, concrete, and roads is comprehensively examined. The impacts of adding plastic waste on properties such as strength, water absorption, and durability are thoroughly explored. The review classifies research studies depending on whether they relate to the incorporation of plastic waste in bricks and tiles or its inclusion in concrete for road construction. The utilization of plastic waste within construction materials emerges as a pivotal locus where environmental, industrial, and social concerns coalesce, propelling us toward a future that champions resource efficiency, ecological harmony, and sustainable prosperity. This paper serves as an illuminating guidepost within this trajectory, celebrating the metamorphosis of a burgeoning idea into a tangible, transformative reality within the larger narrative of sustainable development.
    VL  - 8
    IS  - 5
    ER  - 

    Copy | Download

Author Information
  • Civil Engineering Department, Rajshahi University of Engineering and Technology, Rajshahi, Bangladesh

  • Sections